PATENT (GRANTED)  -  TURBINE ENERGY DEVICE 
  Proof of concept model  
 en   fr   de   עב 
 dk   nl   es   pt 
   Below videos compare between the method of the patent (left videos) to the conventional technology (right videos) 
  An adapter of 9 Volts is powering the bottom motor in each video to demonstrate a turbine. The model has two settings that can be
  replaced with one simple change, in order to reduce as much as possible other variables that may affect the results. The generator
  is located inside the hollow cylinder that can move up and down along its axle  -  and to be locked according to the selected setting.
  The output power in Voltages (V) and Milliamperes (mA) from the generator (DC) is seen in each video on the left side of the device.

 Patent   EP 3123599 B1  ➜  Output power:  10.77 - 10.66  V  ,  91.5 - 90.7  mA  

 Conventional technology  ➜  Output power:  9.06 - 9.01  V  ,  82.9 - 82.6  mA  
Results: The patent method increases the output voltage by more than 16%, and the output power (with normalization to the 
input power) by more than 20%, in comparison to the conventional technology.
⇩   Stator / Rotor Relative Rotational Speed (RPM) Check   ⇩

 Patent   EP 3123599 B1  ➜  Relative speed:  809.3 + 3,020.1 =  3,829.4 RPM  

 Conventional technology  ➜  Relative speed:  0 + 3,299.1 =  3,299.1 RPM  
Results: The patent method increases the relative speed between the stator and rotor by more than 16% while at the same time
the speed of the fastest elements is actually decreased by more than 9%, in comparison to the conventional technology.
 ⇩  Pictures of the patent method  ⇩ 
Open picture in new tab
Open picture in new tab
 ⇩  Pictures of the conventional technology  ⇩ 
Open picture in new tab
Open picture in new tab
© Copyright Ezoory  -  Patent  EP 3123599 B1  -  All rights reserved